November 2026 exhibition - Catalog - Page 22
Etching and aquatint - an explanation
Engraving probably originated as a way of decorating armour and is a form of intaglio
(incised design) printing. Etching followed as a less laborious method of line
engraving. Considered technically simple, it is, in fact, one of the most difficult of
the arts. Earliest examples date from the 16th Century and the process has
undergone little change since it was made famous by artists such as Dürer and
Rembrandt.
In its simplest form, the process is as follows: A copper plate is covered with a thin
layer of wax ground and blackened by the smoke of tapers. The lines of the design
are drawn through the ground with a steel needle, revealing the surface of the metal
below. The plate is then immersed in a bath of acid, which eats into the exposed
copper.
Subtlety is given by taking the plate out of the acid as soon as the faintest lines are
bitten. These faint lines are then 'stopped-out' with varnish and the plate returned
to the acid until the medium and dark lines are stopped out in turn.
When the artist is satisfied with the design, the ground is cleaned off and the plate
covered with ink. This is then almost wiped off with muslin rags, but the ink is
retained in the furrows that have been etched into the copper. A piece of damp
paper is placed on the plate and together they are passed between the rollers of
the press. The pressure from these forces the ink from the lines onto the paper to
make the etching, which, because it is individually printed, is unique.
Aquatint is an etching technique used to create areas of tone. It involves melting particles of resin onto the plate and then immersing
the plate in acid. Again, 'stopping-out' is used where no tone is required or to create a graduation in tone.
When the printing is completed, each print is inspected, approved and then numbered and signed by the artist.
Etchings are original prints, 8hand pulled9 by the artist in a methodical and time consuming process - they are not to be confused with
the limited edition giclée reproductions of paintings.
As an option Andrew has hand coloured several of the editions. Hand colouring involves carefully adding watercolour to the original
print once the ink is dry. No two hand coloured etchings will be the same.